Paradigm Studio Reference CC-690 Center Channel Loudspeaker




Technical Specifications:

Design: 6-driver, 3-way center channel,
MagneShield™
Crossover
: 3rd-order electro-acoustic at 2.5 kHz, 3rd-order electro-acoustic at 350 Hz (bass drivers)
High Frequency Driver
: 25-mm (1 in) G-PAL™ dome, die-cast heatsink chassis, ferro-fluid cooled, IMS / SHOCK-MOUNT™
Midrange Driver: 115-mm (4-1/2 in) S-PAL™ cone, 25-mm (1 in) voice coil, ferro-fluid cooled, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass/Midrange Driver: Two 178-mm (7 in) S-PAL™ cones, ferro-fluid cooled, 25-mm (1 in) voice coils, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Bass Driver: Two 178-mm (7 in) mineral-filled polypropylene cones, 38-mm (1-1/2 in) voice coils, AVS™ die-cast heatsink chassis, IMS / SHOCK-MOUNT™
Low Frequency Extension: 38 Hz (DIN)
Frequency Response:
On-Axis: ±2 dB from 53 Hz - 20 kHz
Off-Axis: ±2 dB from 53 Hz - 18 kHz
Sensitivity: 91 dB / 88 dB
Suitable Amplifier Power Range: 15 300 watts
Maximum Input Power: 200 watts
Impedence: Compatible with 8 ohms
Internal Volume: 48 L / 1.7 cu ft
Height, Width, Depth:
24.0 cm x 91.5 cm x 39.5 cm
9-7/16 in x 36 in x 15-9/16 in
Weight: 31.3 kg / 69 lb each

Finishes:

Cherry, Rosenut, Black Ash:
$1,749.00ea
Piano Black: $1,849.00ea


 

Paradigm Studio Reference CC-690 Features

G-PAL™ Gold-Anodized Pure-Aluminum Domes. Exceptionally rigid low-mass domes with treated textile suspensions ensure remarkably uniform and instantaneous power response. The elevated position of the dome provides better ‘air’ and frequency response that is smooth, pure and clear.

S-PAL™ Satin-Anodized Pure-Aluminum Midrange and Bass / Midrange Cones. Very high stiffness-to-mass ratio and outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass response and freedom from unwanted resonances and distortions.

IMS/SHOCK-MOUNT™ Isolation Mounting System. This unique butyl-rubber driver fastening system found on all Studio Series drivers is a progressive system of critically placed isolation inserts and gaskets that decouple drivers from the speaker enclosure itself. This leading-edge ‘baffle-less’ technology reduces driver / enclosure interactions to inaudible levels.

High-Velocity Low-Noise Aluminum Ports. Bass efficiency and minimum turbulence distortion for cleaner and more articulate bass response. Studio 10 features an elliptical port, a functional touch that allowed us to gain a little more and a little deeper bass response, in fact, far more than is typical in such a compact design.

Beautifully Sculpted Cabinets with Real Wood Veneer Finishes. Add a whole new dimension to the classic appeal of this series. Seven coats of the highest quality lacquer, hand-sanded between coats. Available in four luxurious real wood veneer finishes.

   
     
Untitled Document

audio | home theater | accessories | product lines | used gear | contact us
about overture audio | home

 
Overture Audio
Ann Arbor, Michigan 48104
Phone: 734-662-1812