Paradigm PW-2100 Powered Sub-Woofer

Technical Specifications:

Type: Subwoofer
Design: Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in Ultra-Class-D™ amplifier
Amplifier: High-Current, Discrete Output: 400 watts RMS† (20–150Hz @ < 0.1% THD) 1500 watts Peak††
Amplifier Design Features: Auto-On / Off, soft clipping
Bass Driver: 254-mm (10 in) RCR™ mineral-filled co-polymer polypropylene cone. 38-mm (1-1/2 in) 4-layer voice coil, dual spiders, AVS™ die-cast heatsink chassis.
Low Frequency Extension: 23Hz (DIN)*
Subwoofer Cutoff Frequency: Variable 50Hz – 150Hz
Sub./Sat. Phase Alignment: Variable 0º – 180º
Line Level Input: From Sub-Out / LFE-Out of receiver / processor, or other line level source.
Line Level Input Sensitivity: 100 mV stereo; 200 mV mono
Line Level Input Impedance: 15 k ohms
Line Level High-Pass Output: To left / right of amplifier input or left / right Main-In of receiver
Line Level High-Pass Output Roll-Off: 3rd-order 18 dB / octave at 80 Hz
Internal Volume: 42.8 L / 1.51 cu ft
Height, Width, Depth: 38.1 x 34.9 x 51cm 15 x 13-3/4 x 20-1/16in
Weight: 19 kg / 42 lb each

$799.00

Technical Footnotes