![]() |
||||||||||
|
||||||||||
|
NAD C720 BEE Stereo Receiver For remote on/off switching of ancillary components in a system, such as power amplifiers or active speakers, the C720BEE is equipped with a 12V-trigger system. When< switching the amplifier on, the 12V- trigger output is also activated, which when connected to a device with a 12Vtrigger input will switch on the remote device. Besides the 12V-trigger, the C720BEE also has an AC switched outlet (North American version only) so you can easily switch your entire system on or off with the remote control or from the front panel. It is fashionable to omit tone controls nowadays: however, provided that the tone controls are properly designed, they can be really useful tools in making improvements to the overall sound. The C720BEE tone controls only work at the frequency extremes leaving the critical mid-band essentially unaltered. The tone control circuits can be completely bypassed by using the tone defeat switch. The C720BEE also incorporates NADs acclaimed switchable Soft Clipping circuit, which significantly reduces the risk of damage to loudspeakers due to prolonged high power operation. Design: PowerDrive :NAD takes a stance to the overblown power ratings quoted by many competitors, which dont give a realistic indication of an amplifiers true capabilities. NADs Full Disclosure Power ratings give the guaranteed minimum continuous power output under the worst case loading of 4 Ohms and 20Hz to 20kHz with both channels driven simultaneously, as well as the more meaningful in actual use dynamic power ratings. The C720BEE benefits from NADs proprietary PowerDrive topology, this further refinement of Power Envelope and ISC, is now well established and used throughout the NAD product range. PowerDrive endows the C720BEE with tremendous dynamic power and low impedance drive capability, seemingly contradictory traits to be found in a single amplifier. This is accomplished by using a multistage power supply with a very sophisticated analog computer determining whether to switch in a high voltage or a high current rail depending on the specific operating condition. This optimization is fully automatic and utterly transparent in operation; the result is that the C720BEE sounds far larger and more powerful than its continuous power rating would suggest. PowerDrive is a practical approach to enable an amplifier to easily deal with musical dynamics and difficult speaker loads. Most impressive are the C720BEEs dynamic capabilities; up to 180 Watts into 2 ohms and up to 50 amps peak current capability! |
Tone Control characteristics, sonically transparent relay input switching, and Pure Class A modular preamp stages and power amp driver stages, are directly carried over from the C320BEE. So are the patented power amp output stages, unique low resistance binding post design, copper bus bars for high-current paths, and low-noise discrete regulators. $599.00
| |||||||||
| ||||||||||